wa-law.org > bill > 2023-24 > SB 5057 > Original Bill
[Empty]
By November 1, 2020, the department must establish by rule a state energy performance standard for covered commercial buildings.
In developing energy performance standards, the department shall seek to maximize reductions of greenhouse gas emissions from the building sector. The standard must include energy use intensity targets by building type and methods of conditional compliance that include an energy management plan, operations and maintenance program, energy efficiency audits, and investment in energy efficiency measures designed to meet the targets. The department shall use ANSI/ASHRAE/IES standard 100-2018 as an initial model for standard development. The department must update the standard by July 1, 2029, and every five years thereafter. Prior to the adoption or update of the standard, the department must identify the sources of information it relied upon, including peer-reviewed science.
In establishing the standard under subsection (1) of this section, the department:
Must develop energy use intensity targets that are no greater than the average energy use intensity for the covered commercial building occupancy type with adjustments for unique energy using features. The department must also develop energy use intensity targets for additional property types eligible for incentives in RCW 19.27A.220. The department must consider regional and local building energy utilization data, such as existing energy star benchmarking data, in establishing targets for the standard. Energy use intensity targets must be developed for two or more climate zones and be representative of energy use in a normal weather year;
May consider building occupancy classifications from ANSI/ASHRAE/IES standard 100-2018 and the United States environmental protection agency's energy star portfolio manager when developing energy use intensity targets;
May implement lower energy use intensity targets for more recently built covered commercial buildings based on the state energy code in place when the buildings were constructed;
[Empty]
Must adopt a conditional compliance method that ensures that covered commercial buildings that do not meet the specified energy use intensity targets are taking action to achieve reduction in energy use, including investment criteria for conditional compliance that ensure that energy efficiency measures identified by energy audits are implemented to achieve a covered commercial building's energy use intensity target. The investment criteria must require that a building owner adopt an implementation plan to meet the energy intensity target or implement an optimized bundle of energy efficiency measures that provides maximum energy savings without resulting in a savings-to-investment ratio of less than 1.0, except as exempted in (d)(ii) of this subsection. The implementation plan must be based on an investment grade energy audit and a life-cycle cost analysis that accounts for the period during which a bundle of measures will provide savings. The building owner's cost for implementing energy efficiency measures must reflect net cost, excluding any costs covered by utility or government grants. The implementation plan may exclude measures that do not pay for themselves over the useful life of the measure and measures excluded under (d)(ii) of this subsection. The implementation plan may include phased implementation such that the building owner is not required to replace a system or equipment before the end of the system or equipment's useful life;
For those buildings or structures that are listed in the state or national register of historic places; designated as a historic property under local or state designation law or survey; certified as a contributing resource with a national register listed or locally designated historic district; or with an opinion or certification that the property is eligible to be listed on the national or state registers of historic places either individually or as a contributing building to a historic district by the state historic preservation officer or the keeper of the national register of historic places, no individual energy efficiency requirement need be met that would compromise the historical integrity of a building or part of a building.
Based on records obtained from each county assessor and other available information sources, the department must create a database of covered commercial buildings and building owners required to comply with the standard established in accordance with this section.
By July 1, 2021, the department must provide the owners of covered buildings with notification of compliance requirements.
The department must develop a method for administering compliance reports from building owners.
The department must provide a customer support program to building owners including, but not limited to, outreach and informational material, periodic training, phone and email support, and other technical assistance.
The building owner of a covered commercial building must report the building owner's compliance with the standard to the department in accordance with the schedule established under subsection (8) of this section and every five years thereafter. For each reporting date, the building owner must submit documentation to demonstrate that:
The weather normalized energy use intensity of the covered commercial building measured in the previous calendar year is less than or equal to the energy use intensity target; or
The covered commercial building has received conditional compliance from the department based on energy efficiency actions prescribed by the standard; or
The covered commercial building is exempt from the standard by demonstrating that the building meets one of the following criteria:
The building did not have a certificate of occupancy or temporary certificate of occupancy for all 12 months of the calendar year prior to the building owner compliance schedule established under subsection (8) of this section;
The building did not have an average physical occupancy of at least 50 percent throughout the calendar year prior to the building owner compliance schedule established under subsection (8) of this section;
The sum of the building's gross floor area minus unconditioned and semiconditioned spaces, as defined in the Washington state energy code, is less than 50,000 square feet;
The primary use of the building is manufacturing or other industrial purposes, as defined under the following use designations of the international building code: (A) Factory group F; or (B) high hazard group H;
The building is an agricultural structure; or
A building owner of a covered commercial building must meet the following reporting schedule for complying with the standard established under this section:
For a building with more than 220,000 gross square feet, June 1, 2028;
For a building with more than 90,000 gross square feet but less than 220,001 gross square feet, June 1, 2029; and
For a building with more than 50,000 gross square feet but less than 90,001 square feet, June 1, 2030.
[Empty]
The department may issue a notice of violation to a building owner for noncompliance with the requirements of this section. A determination of noncompliance may be made for any of the following reasons:
Failure to submit a compliance report in the form and manner prescribed by the department;
Failure to meet an energy use intensity target or failure to receive conditional compliance approval;
Failure to provide accurate reporting consistent with the requirements of the standard established under this section; and
Failure to provide a valid exemption certificate.
In order to create consistency with the implementation of the standard and rules adopted under this section, the department must reply and cite the section of law, code, or standard in a notice of violation for noncompliance with the requirements of this section when requested to do so by the building owner or the building owner's agent.
The department is authorized to impose an administrative penalty upon a building owner for failing to submit documentation demonstrating compliance with the requirements of this section. The penalty may not exceed an amount equal to $5,000 plus an amount based on the duration of any continuing violation. The additional amount for a continuing violation may not exceed a daily amount equal to $1.00 per year per gross square foot of floor area. The department may by rule increase the maximum penalty rates to adjust for the effects of inflation.
Administrative penalties collected under this section must be deposited into the low-income weatherization and structural rehabilitation assistance account created in RCW 70A.35.030.
The department must adopt rules as necessary to implement this section, including but not limited to:
Rules necessary to ensure timely, accurate, and complete reporting of building energy performance for all covered commercial buildings;
Rules necessary to enforce the standard established under this section; and
Rules that provide a mechanism for appeal of any administrative penalty imposed by the department under this section.
Upon request by the department, each county assessor must provide property data from existing records to the department as necessary to implement this section.
By January 15, 2022, and each year thereafter through 2029, the department must submit a report to the governor and the appropriate committees of the legislature on the implementation of the state energy performance standard established under this section. The report must include information regarding the adoption of the ANSI/ASHRAE/IES standard 100-2018 as an initial model, the financial impact to building owners required to comply with the standard, the amount of incentives provided under RCW 19.27A.220 and 19.27A.230, and any other significant information associated with the implementation of this section.
[Empty]
By December 1, 2025, the department must adopt by rule a state energy management and benchmarking requirement for tier 2 covered buildings. The department shall include a small business economic impact statement pursuant to chapter 19.85 RCW as part of the rule making.
In establishing the requirements under (a) of this subsection, the department must adopt requirements for building owner implementation consistent with the standard established pursuant to RCW 19.27A.210(1) and limited to energy management planning, operations and maintenance planning, and energy use analysis through benchmarking and associated reporting and administrative procedures. Administrative procedures must include exemptions for financial hardship and an appeals process for administrative determinations, including penalties imposed by the department.
The department must provide a customer support program to building owners including, but not limited to, outreach and informational materials that connect tier 2 covered building owners to utility resources, periodic training, phone and email support, and other technical assistance. The customer support program must include enhanced technical support, such as benchmarking assistance and assistance in developing energy management and operations and maintenance plans, for tier 2 covered buildings whose owners typically do not employ dedicated building managers including, but not limited to, multifamily housing, child care facilities, and houses of worship. The department shall prioritize underresourced buildings with a high energy use per square foot, buildings in rural communities, buildings whose tenants are primarily small businesses, and buildings located in high-risk communities according to the department of health's environmental health disparities map.
[Empty]
The department may adopt rules related to the imposition of an administrative penalty not to exceed 30 cents per square foot upon a tier 2 covered building owner for failing to submit documentation demonstrating compliance with the requirements of this subsection.
Administrative penalties collected under this section must be deposited into the low-income weatherization and structural rehabilitation assistance account created in RCW 70A.35.030 and reinvested into the program, where feasible, to support compliance with the standard.
By July 1, 2027, the department must provide the owners of tier 2 covered buildings with notification of the requirements the department has adopted pursuant to this section that apply to tier 2 covered buildings.
The owner of a tier 2 covered building must report the building owner's compliance with the requirements adopted by the department to the department in accordance with the schedule established under subsection (4) of this section and every five years thereafter. For each reporting date, the building owner must submit documentation to demonstrate that the building owner has developed and implemented the procedures adopted by the department by rule, limited to energy management planning, operations and maintenance planning, and energy use analysis through benchmarking.
By July 1, 2029, tier 2 covered building owners must submit reports to the department as required by the rules adopted in subsection (1) of this section.
[Empty]
By July 1, 2031, the department must evaluate benchmarking data to determine energy use and greenhouse gas emissions averages by tier 2 covered building type.
The department must submit a report to the legislature and the governor by October 1, 2031, with recommendations for cost-effective building performance standards for tier 2 covered buildings. The report must contain information on estimated costs to building owners to implement the performance standards and anticipated implementation challenges.
[Empty]
By December 31, 2032, the department must adopt rules for performance standards for tier 2 covered buildings.
In adopting these performance standards, the department must consider the age of the building in setting energy use intensity targets.
The department may adopt performance standards for multifamily residential buildings on a longer timeline schedule than for other tier 2 covered buildings.
The rules may not take effect before the end of the 2033 regular legislative session.
The department must include a small business economic impact statement pursuant to chapter 19.85 RCW as part of the rule making.
The Washington State University extension energy program, with assistance from the state energy office, must convene a work group to:
Report on the financial impacts to state-owned buildings required to comply with the state energy performance standard as reported under RCW 19.27A.210(14).
Make recommendations to the legislature regarding energy efficiency in the building sector that include, but are not limited to:
Identifying energy efficiency investments or other strategies, and related timelines, for increasing energy efficiency in the buildings sector;
Providing a cost-benefit analysis of options, including energy efficiency, to meet the goal of reducing greenhouse gas emissions from the buildings sector; and
Recommending any changes to chapter 285, Laws of 2019.
The work group convened under this section must consist of, at a minimum: One representative of the office of the superintendent of public instruction; one representative of each of the state's public four-year institutions of higher education; one representative of the state board for community and technical colleges; one representative of the department of social and health services; one representative of the department of corrections; one representative of the department of enterprise services; and two representatives of a national association for industrial and office parks.
Subject to the availability of amounts appropriated for this specific purpose, and in compliance with RCW 43.01.036, the Washington State University extension energy program must submit to the appropriate committees of the legislature:
Financial impacts as required under subsection (1)(a) of this section by December 15, 2023; and
A final report with recommendations as required under subsection (1)(b) of this section by September 1, 2024.
This section expires January 1, 2025.